View your shopping Cart |
|||||
|
|||||
Impart Group IE-900 |
|||||
Ionways Athena |
|||||
Tyent Water Ionizers |
|||||
LIFE Water Ionizers |
|||||
EOS Water Ionizers |
|||||
Chanson Water Ionizers |
|||||
Are You
Acidic?
Check It
With
pHion
pH Strps |
|||||
When
You Feel Too Lazy To Exercise
|
|||||
Blast
Allergies Away |
|||||
|
|||||
Is
Fluoride in your water? |
|||||
Stem Cell Nutrition | |||||
100% Kosher |
|||||
Denta Care Heavy Metal
Mouth Wash
|
|||||
WaveShield |
|||||
Are You
Acidic?
Check It
With
pHion
pH Strps |
|||||
When you can't afford an
alkaline water ionizer,
but you need to get alkaline... |
|||||
Magnetizer
Best Price |
|||||
Save Water & Fuel for
only
$7.95 |
|||||
Healthy Cows Eat Nothing But Grass |
|||||
Other pHion Products: |
Fluoride Test Kit
Why You Should Not Consume Fluoride
With this test you can you can test for both fluoride and chlorine levels in your drinking water. Use it to see how well your water filter is at removing these poisons from your water. If you know that your water is being fluoridated and you still don't have a fluoride pre-filter to filter your tap water then we recommend that you read the reports on this page showing alarming reports of fluoride being linked to bone cancer and other health problems. This test will begin to give you a reaction when the sample water has 2 parts per million of fluoride as indicated on the strip you will receive with your kit. When we tested our water we did not get a reaction, so this means that our tap water has less than 2 ppm. The EPA has set 4ppm of fluoride as the maximum contaminant level MCL). We have added important information about fluoride from the EPA website for your convenience, but the link in also provided for you to visit the site directly. Please read the other reports on the health effects of drinking to much fluoride in drinking water.
Basic Information about Fluoride in Drinking Water
What are fluoride's health effects? This health effects language is not intended to catalog all possible health effects for fluoride. Rather, it is intended to inform consumers of some of the possible health effects associated with fluoride in drinking water when the rule was finalized. How is fluoride regulated? In 1974, Congress passed the Safe Drinking Water Act. This law requires EPA to determine safe levels of contaminants in drinking water which do or may cause health problems. These non-enforceable health goals, based solely on possible health risks and exposure over a lifetime, are called maximum contaminant level goals (MCLG). Contaminants are any physical, chemical, biological or radiological substances or matter in water. The MCLG for fluoride is 4 mg/L or 4 ppm. EPA has set this level of protection based on the best available science to prevent potential health problems. What are EPA's drinking
water regulations for fluoride?
You can visit the EPA site for the latest updates they may have made to this information ==================================== Notice These Other Reports On Fluoride Below VIDEO: Alex Jones Interviews Dr. Neil Carman on Water Fluoridation This is a very compelling interview with Dr. Neil carman giving some eye popping details of fluoride. You must see this. Click here to view this interview.
Reuters: Another Study Links Fluoride to Bone Cancer
Human and animal cancer evidence prompts review of
fluoride Fluoride Test Kit DetailsThe fluoride test is especially suited for rapid control of fluoride concentrations. Its purpose is to define concentration ranges and detect values which fall short of or exceed given limits.
Color
Reaction:
Fluoride
Test Kit Contents: 1 bottle Fluoride test solution (hydrochloric acid) 1 disc color scale, 1 pin/needle, Fluoride Test Instructions: 1. Fill a 20ml (beaker/small plastic container) about half-way with the water sample (about 10ml) 2. Add 20 drops hydrochloric acid. The pH value must be below 1. 3. Remove one fluoride test disc from ziplock bag. Close bag immediately. 4. Pierce the round test disc in the middle with the enclosed needle! 5. Throw test disc into the water sample and submerge completely. 6. after 5 - 7 minutes the test disc is saturated with the solution, i.e. it does not absorb any more liquid. At the latest 2 minutes after saturation remove the test disc from the sample and compare the size of the bleached zone with the disc color scale. This test will give you a reaction when the sample water has at least 2 parts per million of fluoride. Otherwise no changes will be observed.
For high concentrations the sample has to be diluted. After evaluation the dilution has to be taken into account.
Storage We included three tests discs so you can test your tap water, then the water produced by your water filter to see if fluoride was removed by filtration and one extra disc if something went wrong with your testing. The solution in this test is the same as in the Chlorine Test Solution. This means that you can use the solution to test for chlorine in your water. Refer to the Chlorine Test Solution page for instructions.
WaterSafe All-In-One Test Kit | Alkaline Water Test Kit | Heavy Metal Test Kit Hanna ORP Test Meter | Hanna ORP/Temp/pH Test Meter | Chlorine Test Kit | Fluoride/Chlorine Test Kit WaterSafe All-In-One Test Kit | Alkaline Water Test Kit | Heavy Metal Test Kit Hanna ORP Test Meter | Hanna ORP/Temp/pH Test Meter What is Microwater? Research Articles Experts Comments Alkaline Water Books Alkaline Water Videos Testimonials Alkaline Water Ionizers
Product Categories:
|